CBI Pro-Akademia

Rozwiń menu ▼

Contact

Katarzyna Woźniak
Technical Editor

e-mail:

Contact

Monika Stojan
Technical Editor

e-mail: 

AI Partners

The image shows our cooperation with the online plagiarism detection service PlagScan

The task “Maintenance
of the anti-plagiarism system” is being
financed by an agreement 605/P-DUN/2018
from the resources of Polish Ministry of Science
and Higher Education dedicated to
the activity popularising the science.

Zadanie „Utrzymanie systemu antyplagiatowego”
finansowane w ramach umowy
605/P-DUN/2018 ze środków Ministra
Nauki i Szkolnictwa Wyższego przeznaczonych
na działalność upowszechniającą naukę

 

 

Crossref Member Badge

 

 

29_4

Quality evaluation of iron casting en-gjl-200 produced on the disamatic line

Date added: 2018-10-01

Pages: 36-40


Author/Authors

Kinga Boroń


Abstract

This article discusses the issues concerning the quality of casting surface with a small unit weight manufactured on the Disamatic automatic casting lines in a flaskless mould with a vertical parting line. The research was conducted in manufacturing conditions in one of the casting facilities in the country. The identification of casting defects for a monthly manufacturing cycle was made and agreed that the main causes of scrap casting are defects on the raw surface: lumps of moulding sand which after removal form cavities and draws as well as defects of gas origin such as blowholes. There are also defects of form namely short runs. In the later part of the work, the research results of the properties of moulding sand were presented and casting defects were selected the occurrence of which is connected with the quality of moulding sands.

https://doi.org/10.32933/ActaInnovations.29.4


Keywords

grey cast iron, casting defects, sand mould


Downloads